Fixtures:
The key to successful robotic soldering is the design and fabrication of fixtures. The fixture must allow for soldering tip access, be easy to load and unload, and hold the assembly very securely during soldering. Fancort has been designing and fabricating precision tooling for the past forty years and we understand the requirements needed to make these solder robots perform at their maximum capability.
If you would like to see some of the fixtures we have designed and built, please go to this link or call us to learn more about the Japan UNIX soldering robots and Fancort's fixturing capabilities.
One head can do point-to-point and line soldering
Solid core solder tips with 0.5mm of plating retain heat from point-to-point
Change tip in 30 seconds by removing the heater block assembly
Standard 200W cross heater with built-in thermocouple, 300W optional
Graduated angle setter with tooling pins to accurately reproduce solder feed position when changing programs
Precisely feeds solder wire from 0.5 to 1.2mm diameter; optional 0.2mm
Program robot path, speed and all soldering conditions on teach pendant, up to 63 soldering conditions
Tip temperature range to 450ºC
Alarms: out of solder, solder jamming, heater control
Four desktop models with work area up to 510mm x 510mm x150mm
For in-line automation three robotic options. Each system comes with a controller, teaching box and solder tip cleaner.
Individual components can be purchased for integration to your automation cell.
Options
FAB (Features, Advantages and Benefits) of a Japan UNIX Soldering System
Walang komento:
Mag-post ng isang Komento